How to read the freight class chart
LTL carriers price freight by class: the higher the class, the higher the rate per hundredweight. For most freight the class now comes from density, the weight of each handling unit divided by its cube, measured with the pallet and anything that sticks out. The chart above lists the 13 classes of the standard density scale and, for the unit size you enter, the weight range that lands in each one. Each class has its own page with more detail.
The scale was expanded from 11 to 13 steps by NMFTA's Docket 2025-1, effective 19 July 2025. The light end did not change. At the dense end, everything at 30 pcf or more used to be class 60; now 30 to under 35 pcf is class 60, 35 to under 50 is class 55, and 50 or more is class 50. The same docket moved roughly two thousand commodity listings onto density-based classes.
Classes that are not on the density scale
The NMFC has 18 classes in all. Five of them, 77.5, 110, 150, 200 and 500, do not appear on the standard density scale. Freight can only be in one of these classes if its own NMFC item assigns it, either as a fixed class or through an item-specific density scale. If a carrier quotes one of these classes, ask for the item number and check it.
The same applies the other way: a density-scale result is only your class if your item says it classifies by the standard scale. That is why every result on this site is labelled an estimate.
Getting into a lower class
- Build squarer, fuller pallets. Cube counts at the greatest dimensions, so a taper or a single tall carton costs as much as a full layer.
- Stay inside the deck. Overhang adds to every dimension it touches.
- Consolidate part pallets. Two half-height pallets have twice the deck height and twice the empty pallet weight of one full pallet.
- Right-size cartons. Void fill is volume you pay for.
- Keep a margin above each break. Dimensioners and scales read within a tolerance. NMFTA suggests designing several per cent above a threshold.
The freight class calculator shows the margin to the next break for a whole shipment, and the pallet calculator finds the carton pattern that fills the deck.
Questions shippers ask
How many freight classes are there?
Eighteen, from class 50 to class 500. Thirteen are on the standard density scale; 77.5, 110, 150, 200 and 500 are reached only through specific NMFC items.
What is the freight class for 10 pounds per cubic foot?
Class 92.5. The band runs from 10 to under 12 lb/ft³.
Did freight classes change in 2025?
Yes. Docket 2025-1 added three density steps at the dense end (classes 60, 55 and 50 above 30 pcf) and moved many items to density-based classes, effective 19 July 2025.
Which freight class is cheapest?
Class 50, the densest. Rates rise with each class up to 400 and 500.
Do I include the pallet when working out freight class?
Yes. Density is measured on the handling unit as tendered: the pallet’s height and weight count, and the footprint is whichever is larger, the pallet or the load on it. Enter the built height, pallet included, in the chart above.
Sources
Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1, effective 19 July 2025). The NMFC item for your commodity decides the actual class.
Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.