ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 175

LTL · Density sub 4

Freight Class 175

Class 175 covers 4 to under 6 lb/ft³ (64–96 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 175.

ShipEstimatorClass 175 weight finder
Units
Class 175 on the density scale
Weight for class 175– 
Cube–
Density band–
Your density–
Your class–

Class 175 density range

Class 175 is sub 4 of the 13-step NMFC density scale: 4 to under 6 lb/ft³, or 64–96 kg/m³ in metric. It is light, bulky freight from 4 to under 6 lb/ft³. Freight at 6 pcf or more moves to class 125, and freight below 4 pcf drops to class 250.

Upholstered furniture, assembled shelving, boxed clothing on hangers and many plastic household goods measure around 4–6 pcf. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 175

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 175 are:

Weight range for class 175 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.0160239
48 × 40 × 4853.3213319
48 × 40 × 6066.7267399
48 × 40 × 7280.0320479
48 × 48 × 4864.0256383
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.9196292

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 213 to 319 lb. Adding 107 lb to the lightest class 175 unit of that size takes it to class 125.

Class 175 in metric

In metric the band is 64–96 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 4877116
120 × 80 × 16048 × 32 × 63102152
120 × 100 × 12048 × 40 × 4897145
120 × 100 × 16048 × 40 × 63127190

Shipping freight at class 175

Class 175 is where volume dominates the bill. Disassembling or flat-packing items, compressing soft goods and stacking cartons to the full pallet height can move freight to class 125 at 6 pcf.

The band sits between two wider ones: 4 pcf is the edge of class 250, a big jump in rate. Keep a margin above it.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 125: 6 pcf to under 8; the next class down in cost.
  • Class 250: 2 to under 4 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 175?

4 to under 6 lb/ft³ on the standard NMFC density scale (64–96 kg/m³).

Is class 175 expensive?

It is among the higher classes: freight this light uses a lot of trailer space per pound, and the rate per hundredweight reflects that.

Is my freight automatically class 175 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.