ShipEstimator
  1. Home
  2. Freight Emissions Calculator

Sustainability · Scope 3

Freight Emissions Calculator

Add each leg of the journey with its mode and distance, and the weight of the goods. You get the greenhouse gas emissions in CO2 equivalent, leg by leg, and the same shipment by other modes for comparison.

ShipEstimatorCO2e for a shipment
Distance in
Line 1

Line 2

Line 3

Scope
Shipment emissions
Total emissions– 
Tonne-kilometres–
Average intensity–
Largest leg–
Total distance–
The same weight over the same total distance by one mode
ModeCO2evs your route

How the freight emissions calculator works

Freight emissions are reported per tonne-kilometre: one tonne of goods carried one kilometre. Multiply the weight of the shipment by the distance of each leg and by an emission factor for the vehicle type, and add the legs up. That is the activity-based default method in the GLEC Framework and the international standard ISO 14083, used when a carrier cannot give you emissions for your specific shipment.

  • Weight: the gross weight of the goods, including packaging, but not the container, trailer or pallet's carrier equipment. Default factors already account for empty running and typical load factors.
  • Distance: the actual distance of each leg. For sea legs, use the routed distance from the sea distance calculator, not the straight line; for air, the flown distance.
  • Factors: the UK government's 2026 greenhouse gas conversion factors for freight, published by the Department for Energy Security and Net Zero. They give kilograms of CO2 equivalent (CO2, methane and nitrous oxide) per tonne-kilometre.
  • Scope: well-to-wheel adds the emissions from producing and delivering the fuel to the direct emissions from burning it. GLEC and ISO 14083 report well-to-wheel; tick "direct only" for tank-to-wheel figures.

The formula

Tonne-km (per leg) = weight (tonnes) × distance (km) CO2e (per leg) = tonne-km × emission factor (kg CO2e per tonne-km) Well-to-wheel factor = direct (tank-to-wheel) + fuel supply (well-to-tank) Shipment CO2e = sum of the legs

Emission factors used, in grams of CO2e per tonne-kilometre:

Emission factors per tonne-kilometre
ModeDirect (TTW)Fuel supply (WTT)Well-to-wheel
Truck: articulated, over 33 t (average load)78.418.096.3
Truck: average articulated79.318.297.5
Truck: rigid, over 17 t172.637.4209.9
Truck: average HGV103.623.6127.1
Truck: refrigerated articulated91.721.1112.8
Van up to 3.5 t (diesel)635.1150.9786.1
Rail freight25.86.932.7
Container ship, 8,000+ TEU12.72.915.5
Container ship, average16.13.619.8
Container ship, feeder (under 1,000 TEU)36.88.345.1
Bulk carrier, average3.50.84.3
General cargo ship, average13.23.016.2
Air freight, long-haul531.3135.2666.5
Air freight, short-haul755.4205.2960.5

Worked example: 12 tonnes from Shenzhen to a Dutch warehouse

A 40-foot container with 12 tonnes of goods is trucked 80 km to Yantian, shipped 18,252 km to Rotterdam via the Suez Canal, and trucked 60 km to the warehouse.

  • Sea leg: 12 t × 18,252 km = 219,024 tonne-km, × 19.8 g = 4.33 t CO2e.
  • Two truck legs: 1,680 tonne-km at 96.3 g = 0.16 t CO2e.
  • Total: 4.49 t CO2e well-to-wheel. Routed around the Cape of Good Hope (24,695 km at sea) it is 6.02 t CO2e.
  • The same goods by air, about 9,335 km, would be 74.82 t CO2e without radiative forcing and 116.05 t CO2e with it: roughly 17 to 26 times the sea route.

Why modes differ so much

Per tonne-kilometre, a large container ship emits a few grams of CO2e, a freight train around 30, an articulated truck around 100 and an aircraft several hundred. One tonne over 1,000 km comes to about 96 kg by truck, 33 kg by rail, 20 kg by container ship, 666 kg by long-haul air. Scale matters: an ultra-large container ship spreads its fuel over thousands of boxes, while a small feeder ship can emit nearly three times as much per tonne-kilometre. Load factor matters too: a half-empty truck emits more per tonne carried than a full one, which is why the factors above are averages across real loading.

Radiative forcing is the extra warming caused by aircraft emissions at altitude, such as contrails and nitrogen oxides. The UK factors offer it as an option because the science is less settled; many company reports include it to avoid understating air freight.

Mistakes in shipment carbon accounting

  • Straight-line distances. Ships follow coasts, canals and straits; a great-circle distance can understate a sea leg by a third.
  • Volume instead of weight. Factors are per tonne. Light, bulky freight still counts by its actual weight, even though it uses more space.
  • Mixing scopes. Do not add well-to-wheel figures for some legs and direct-only for others in the same report.
  • Using default factors when carrier data exists. Default factors are for when you have nothing better. Carriers that report under ISO 14083 can give you primary data for your actual lanes.
  • Forgetting the empty return. It is already inside the average factors; do not add a second, empty leg.

Questions shippers ask

How do you calculate CO2 emissions for shipping?

For each leg, multiply the weight in tonnes by the distance in kilometres to get tonne-kilometres, then multiply by an emission factor for the mode (kg CO2e per tonne-km). Add the legs. The GLEC Framework and ISO 14083 describe the method in detail.

What is the emission factor for a truck per tonne-km?

In the UK government's 2026 factors, an average articulated truck over 33 tonnes emits 78.4 g CO2e per tonne-km directly, 96.3 g well-to-wheel. Smaller rigid trucks and vans emit far more per tonne-km.

Is sea freight better for the environment than air freight?

By a very wide margin. Per tonne-kilometre, long-haul air freight emits about 34 times as much CO2e as an average container ship well-to-wheel, or about 52 times with radiative forcing. Ships sail longer routes than planes fly, so for a whole shipment the gap is smaller: about 17 to 26 times in the Shenzhen to Rotterdam example above.

What is well-to-wheel?

Emissions from the whole fuel chain: extracting, refining and transporting the fuel (well-to-tank) plus burning it in the vehicle (tank-to-wheel). ISO 14083 requires well-to-wheel reporting.

Which factors does this calculator use?

The DESNZ greenhouse gas conversion factors 2026 from the UK Department for Energy Security and Net Zero, freight section, in kg CO2e per tonne-km. They are updated each June.

Sources

Rules checked: November 2026 Emission factors: DESNZ greenhouse gas conversion factors 2026, published June 2026.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.