ShipEstimator
  1. Home
  2. Linear Feet Calculator

LTL · Trailer space

Linear Feet Calculator

Enter each pallet size as it will be tendered. You get the linear feet of trailer floor the shipment takes, the share of a 53-foot trailer, and what a linear-foot rule would do to the billed weight.

ShipEstimatorLinear feet of trailer used
Units
Line 1

Line 2

Carrier linear-foot rule

Defaults follow one published LTL rules tariff (12 ft, 500 lb per foot). Your carrier's figures may differ: check its rules tariff.

Trailer space
Linear feet– 
Floor positions–
Pallets–
Share of a 53′ trailer–
Actual weight–
Weight under the rule–
Linear metres–

How the linear feet calculator works

Linear feet measure how much of a trailer's length a shipment takes up, from the nose towards the doors. Carriers care because a trailer sells by its floor: a shipment that is light but long blocks freight that would otherwise ride in that space. This calculator loads the shipment the way a dock would.

  1. Stacking first. Pallets marked stackable are put two or three high, as far as the roof allows at the height you entered. Each stack is one floor position.
  2. Rows across the width. Positions are placed in rows across the trailer: two 40-inch-wide pallets side by side in a 98-inch van, three 800 mm Euro pallets in a European trailer, one oversize crate alone. Each pallet size is loaded in its own rows, one size after another.
  3. Add up the rows. The depth of every row, added together and divided by 12, is the linear feet. A part row counts in full, because nothing else fits beside a lone pallet in practice.

By default each pallet keeps its entered length along the trailer, which is how most LTL quotes assume it is loaded. Tick the turning option to let the tool turn pallets sideways when that is shorter, as a dock might do for a 48 × 40 pallet in a wide trailer.

The linear feet formula

Floor positions = pallets ÷ how many high (rounded up) Rows = positions ÷ pallets per row (rounded up) Linear feet = rows × pallet length along the trailer (in) ÷ 12 Shortcut for 48 × 40 pallets, two across, not stacked: Linear feet = pallets ÷ 2 (rounded up) × 4

One full 53-foot dry van is about 52.5 linear feet inside. A useful rule of thumb in LTL pricing: every two standard pallets that cannot be stacked use four linear feet, so ten pallets use twenty feet, close to 40 % of the trailer.

Worked example: a mixed LTL shipment

The shipment loaded above has six 48 × 40 inch pallets, 50 inches tall and not stackable, plus four 48 × 48 inch drum pallets, 40 inches tall, that can go two high.

  • The six standard pallets sit two across in three rows of 48 inches: 12 linear feet.
  • The four drum pallets stack into two positions. Two 48-inch-wide pallets take 96 inches, so they fit side by side in one 48-inch row: 4 linear feet.
  • Total: 16 linear feet, about 30 % of a 53-foot trailer.

The shipment weighs 7,800 lb. Under a rule of 500 lb per linear foot from 12 feet, 16 feet sets a minimum of 8,000 lb, so it would be billed on 200 lb more than it weighs. Mark the drum pallets do-not-stack and the shipment grows to 20 feet: 10,000 lb under the per-foot minimum, and under the tariff quoted below, 20 feet or more is billed at no less than 20,000 lb, more than two and a half times its real weight.

Linear-foot rules in LTL tariffs

LTL rates are built on weight and class, which works when freight is dense enough to share the trailer. Carriers protect themselves against long, light shipments in their rules tariffs, and the rules vary from carrier to carrier:

  • Linear-foot rules set a minimum billed weight per linear foot once a shipment takes more than a threshold length. One published rules tariff, for example, applies 500 lb per linear foot (or fraction) from 12 feet, a 20,000 lb minimum from 20 feet and 40,000 lb from 45 feet. Thresholds between 10 and 20 feet are common.
  • Cubic capacity rules do the same job by volume: a shipment over a set number of cubic feet and under a set density is rerated as if it were denser. The density calculator gives the figures carriers test.
  • Do-not-stack instructions count against you: if the bill of lading or the pallet says not to stack, the carrier measures the floor actually used.

Because these rules are carrier-specific, the defaults in the calculator are editable. Look up the "linear foot", "capacity load" or "cubic capacity" item in your carrier's rules tariff, and when a shipment approaches half a trailer, ask for a volume LTL or partial truckload quote instead: it is usually cheaper than a rerated LTL bill.

Mistakes that inflate linear feet

  • Not marking freight stackable when it is. Two stackable pallets use one floor position; marked do-not-stack they use two.
  • Odd widths. A 52-inch-wide crate rides alone in its row, so 48 inches of width beside it are wasted. Where you can, build pallets to 40 or 48 inches wide.
  • Pyramids and tall caps. A pallet with one carton on top cannot take another pallet. Square the top off.
  • Splitting one shipment over several bills. Many tariffs let the carrier combine same-day shipments to one consignee when applying linear-foot rules.

Questions shippers ask

How do you calculate linear feet for a pallet shipment?

Work out how many floor positions the shipment needs (stacked pallets share one), divide by how many fit across the trailer (two standard pallets in a US van), round up to whole rows, multiply by the pallet length along the trailer in inches, and divide by 12.

How many linear feet is a standard pallet?

A 48 × 40 inch pallet loaded straight takes 4 feet of trailer length, but two fit side by side, so in practice each pallet uses about 2 linear feet. Turned, with the 40-inch side along the trailer, a pair uses 3⅓ feet.

How many linear feet is a 53 foot trailer?

About 52.5 linear feet of usable floor inside a 53-foot van; the outside length includes the walls and doors.

What is the linear foot rule in LTL?

A rules-tariff item that bills a shipment at a minimum weight per linear foot when it takes up more than a threshold length of the trailer. Thresholds and minimums differ between carriers, so check your carrier's tariff; the calculator lets you enter its figures.

Is linear feet the same as loading metres?

They measure the same thing in different units and trailer widths. One linear foot is 0.3048 metres. Loading metres (LDM) are used in Europe on 2.4–2.48 m wide trailers; the LDM calculator handles those.

Sources

Rules checked: November 2026 Linear-foot and cubic capacity rules are set by each carrier's rules tariff; the defaults are one published example.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.