How the trailer pallet calculator works
A truckload is sold by the trailer, so the question that sets your cost per unit is simple: how many pallets will the driver close the doors on? The answer depends on three things, and the calculator checks each one.
- Floor positions. The tool fills the trailer's interior floor with your pallet footprint, trying every way of facing the pallets: all with the long side along the trailer ("straight"), all turned, and mixes of the two in blocks (often called pinwheeling). It keeps the arrangement with the most positions and draws it.
- Height. If the freight can take weight on top, the tool works out how many pallets high fit under the roof at your loaded height, up to the limit you choose.
- Payload. Positions times tiers is the space limit. The weight limit is the trailer's typical legal payload divided by the weight of one pallet. You can ship the smaller of the two.
A 50 mm (2 inch) allowance is taken off the floor length, because real pallets are never placed with zero clearance and the doors still have to close. Interior sizes are typical of current equipment; a particular trailer can be an inch or two narrower or shorter, especially reefers with thick insulation, so measure yours if a plan comes out exactly at the limit.
How many pallets fit: quick answers
Floor positions for one layer, computed by this calculator with the interior sizes listed further down:
| Trailer or container | 48 × 40 in | 48 × 48 in | 1200 × 800 mm | 1200 × 1000 mm | 1165 × 1165 mm |
|---|---|---|---|---|---|
| 53′ dry van (US/CA) | 30 | 26 | 39 | 30 | 26 |
| 48′ dry van (US/CA) | 28 | 22 | 36 | 28 | 24 |
| 28′ pup trailer (LTL) | 16 | 12 | 20 | 16 | 14 |
| 26′ box truck | 14 | 12 | 19 | 14 | 12 |
| 13.6 m curtainsider (EU/UK) | 26 | 22 | 33 | 26 | 22 |
| 45′ (13.7 m) semitrailer (AU) | 26 | 22 | 34 | 26 | 22 |
| 20′ container | 9 | 4 | 11 | 9 | 10 |
| 40′ container | 20 | 9 | 23 | 20 | 20 |
| 45′ high cube container | 24 | 11 | 27 | 24 | 22 |
So a 53-foot dry van takes 30 standard 48 × 40 inch pallets when they are turned (the 48-inch side across the trailer, two per row, fifteen rows) and 26 when loaded straight. Loaded two high, those numbers double, as long as the payload allows it: 60 pallets at 1,100 lb each would be 66,000 lb, far beyond what a US trailer can legally carry.
Straight, turned or pinwheel?
A standard 48 × 40 pallet can go in two ways. Straight means the 48-inch stringer side runs along the trailer: two pallets take 80 inches of the width and each row uses four feet of length. Turned means the 40-inch side runs along the trailer: two pallets take 96 inches of a 98- to 100-inch interior and each row uses only 40 inches of length. Turning gains about four pallets in a 53-footer, but it needs a trailer wide enough and a forklift driver who can get the second pallet in tight against the wall.
Turned pallets are entered from the forklift side, so pallets with four-way entry (block pallets, most GMA pallets) are easy to turn, while two-way stringer pallets often are not. Pinwheeling alternates straight and turned pallets in a row or between rows. It is useful when the trailer is too narrow to turn two pallets side by side, or to lock loads in place, and the calculator includes those mixed patterns in its search.
Worked example: double stacking in a 53′ van
A shipper has 48 pallets of bottled water, 48 × 40 inches, 54 inches tall and 2,000 lb each.
- Floor positions: 30 with the pallets turned.
- Height: two pallets are 108 inches, which just fits a 108-inch interior, so the space limit is 60 pallets.
- Payload: about 45,000 lb ÷ 2,000 lb = 22 pallets. Weight is the limit, by a wide margin.
So the load is 22 pallets, single stacked, on 11 rows of floor. The remaining 26 pallets need a second truck. Dense freight like this "weighs out" long before it "cubes out"; for light freight such as empty bottles the same trailer would cube out at 60 pallets.
Weight limits behind the payload figures
- United States: 80,000 lb gross vehicle weight on the Interstate system, with 34,000 lb on a tandem axle group and the bridge formula on top. A typical tractor and 53-foot van weigh 33,000 to 36,000 lb, which leaves roughly 43,000 to 46,000 lb of freight.
- European Union: 40 tonnes for a five- or six-axle articulated vehicle (44 tonnes in intermodal traffic and in several member states), so a 13.6 m curtainsider usually takes 24 to 26 tonnes.
- United Kingdom: 44 tonnes on six axles, which allows a little more payload than the EU default.
- Containers: the CSC plate on the door gives the maximum gross weight, but road limits for the truck carrying the box are usually lower, especially for a heavy 20-footer.
Use the custom trailer option to enter your own payload when your equipment or your country's limits differ.
Mistakes that leave pallets on the dock
- Planning on 53 feet of floor. The outside length is 53 feet; the inside is closer to 52 feet 6 inches, and that last half-foot is often what a planned extra row needs.
- Assuming everything can be turned. Two turned 48-inch pallets need 96 inches plus clearance. Older or reefer trailers at 96 to 98 inches inside may not take them.
- Forgetting overhang. A pallet with cartons overhanging by an inch on each side is a 50 × 42 inch pallet as far as the trailer is concerned. Use the custom pallet size.
- Double stacking freight that cannot take it. Crushed cartons are a claim you will not win if the bill of lading said nothing about stacking.
- Ignoring axle weights. A legal total can still be illegal on the drive axles if all the heavy pallets are at the nose. Spread dense freight along the trailer.
Questions shippers ask
How many pallets fit in a 53 foot trailer?
30 standard 48 × 40 inch pallets turned, or 26 loaded straight, on the floor. Double stacked, up to 60 if the freight can be stacked and the weight allows it. Euro pallets (1200 × 800 mm) fit 39 on the floor, three across.
How many pallets fit in a 26 foot box truck?
About 14 standard pallets if they can be turned in a 96-inch-wide box, or 12 loaded straight. Box trucks typically carry 8,000 to 10,000 lb of freight, so check the weight before planning a full floor.
How many Euro pallets fit on a European trailer?
33 Euro pallets (1200 × 800 mm), three across in eleven rows, on a 13.6 m trailer. UK and EUR 2 pallets (1200 × 1000 mm) fit 26. Each Euro pallet takes 0.4 loading metres; the LDM calculator works out part loads.
How many pallets fit in a 20ft and a 40ft container?
On the floor: 9 standard US pallets or 11 Euro pallets in a 20′, and 20 US or 23 Euro pallets in a 40′. Containers are only about 92.6 inches wide inside, so two 48-inch pallets cannot be turned side by side.
What is the difference between floor positions and pallets?
Floor positions are spots on the trailer floor. If pallets can be stacked two high, each position holds two pallets, so the pallet count is positions times tiers, unless the payload runs out first.
Sources
Rules checked: November 2026 Interior sizes and payloads are typical values; trailers differ by an inch or two and payload depends on the tractor and local rules.
Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.
- FHWA: federal size regulations for commercial motor vehicles — 53-foot semitrailer lengths and 102-inch width
- eCFR 23 CFR 658.17: weight — 80,000 lb gross, 34,000 lb tandem, bridge formula
- EUR-Lex: Council Directive 96/53/EC on dimensions and weights — 40 t articulated, 44 t intermodal, 2.55 m width
- Maersk: types and sizes of containers
- EPAL: EUR 1 Euro pallet specification