ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 250

LTL · Density sub 3

Freight Class 250

Class 250 covers 2 to under 4 lb/ft³ (32–64 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 250.

ShipEstimatorClass 250 weight finder
Units
Class 250 on the density scale
Weight for class 250– 
Cube–
Density band–
Your density–
Your class–

Class 250 density range

Class 250 is sub 3 of the 13-step NMFC density scale: 2 to under 4 lb/ft³, or 32–64 kg/m³ in metric. It is very light, bulky freight from 2 to under 4 lb/ft³. Freight at 4 pcf or more moves to class 175, and freight below 2 pcf drops to class 300.

Mattresses, assembled plastic furniture, empty plastic containers and large lampshades typically measure 2–4 pcf. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 250

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 250 are:

Weight range for class 250 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.080159
48 × 40 × 4853.3107212
48 × 40 × 6066.7133266
48 × 40 × 7280.0160319
48 × 48 × 4864.0128255
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.998195

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 107 to 212 lb. Adding 107 lb to the lightest class 250 unit of that size takes it to class 175.

Class 250 in metric

In metric the band is 32–64 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 483977
120 × 80 × 16048 × 32 × 6351101
120 × 100 × 12048 × 40 × 484896
120 × 100 × 16048 × 40 × 6364127

Shipping freight at class 250

At this density a standard pallet of freight weighs only a few hundred pounds, but takes the same trailer floor as a heavy one. LTL rates per hundredweight are high, and spot truckload, volume LTL or partial truckload quotes are often cheaper for several pallets.

Compression, vacuum packing and nesting are the main density levers for products in this band.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 175: 4 pcf to under 6; the next class down in cost.
  • Class 300: 1 to under 2 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 250?

2 to under 4 lb/ft³ on the standard NMFC density scale (32–64 kg/m³).

How light is class 250 freight?

2 to under 4 lb per cubic foot. A 48 × 40 × 72 inch pallet in this class weighs between 160 and 319 lb as built.

Is my freight automatically class 250 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.