ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 300

LTL · Density sub 2

Freight Class 300

Class 300 covers 1 to under 2 lb/ft³ (16–32 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 300.

ShipEstimatorClass 300 weight finder
Units
Class 300 on the density scale
Weight for class 300– 
Cube–
Density band–
Your density–
Your class–

Class 300 density range

Class 300 is sub 2 of the 13-step NMFC density scale: 1 to under 2 lb/ft³, or 16–32 kg/m³ in metric. It is extremely light freight from 1 to under 2 lb/ft³. Freight at 2 pcf or more moves to class 250, and freight below 1 pcf drops to class 400.

Large foam products, empty cartons and drums, model aircraft and inflatable goods measure around 1–2 pcf. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 300

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 300 are:

Weight range for class 300 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.04079
48 × 40 × 4853.353106
48 × 40 × 6066.767132
48 × 40 × 7280.080159
48 × 48 × 4864.064127
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.94997

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 53 to 106 lb. Adding 53 lb to the lightest class 300 unit of that size takes it to class 250.

Class 300 in metric

In metric the band is 16–32 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 481938
120 × 80 × 16048 × 32 × 632550
120 × 100 × 12048 × 40 × 482448
120 × 100 × 16048 × 40 × 633263

Shipping freight at class 300

Freight this light is priced almost entirely on the space it takes. If it cannot be compressed or nested, compare LTL with volume, partial truckload and dedicated options; the class-based rate may not be the cheapest way to move it.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 250: 2 pcf to under 4; the next class down in cost.
  • Class 400: under 1 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 300?

1 to under 2 lb/ft³ on the standard NMFC density scale (16–32 kg/m³).

Can I ship class 300 freight by LTL?

Yes, but compare quotes: for several pallets, volume or partial truckload pricing based on trailer space is often cheaper.

Is my freight automatically class 300 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.