ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 400

LTL · Density sub 1

Freight Class 400

Class 400 covers under 1 lb/ft³ (0–16 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 400.

ShipEstimatorClass 400 weight finder
Units
Class 400 on the density scale
Weight for class 400– 
Cube–
Density band–
Your density–
Your class–

Class 400 density range

Class 400 is sub 1 of the 13-step NMFC density scale: under 1 lb/ft³, or 0–16 kg/m³ in metric. It is the lightest freight on the density scale, under 1 lb/ft³. Freight at 1 pcf or more moves to class 300.

Ping-pong balls, empty plastic bottles, large foam packaging and some inflated goods weigh less than a pound per cubic foot. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 400

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 400 are:

Weight range for class 400 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.0039
48 × 40 × 4853.3052
48 × 40 × 6066.7066
48 × 40 × 7280.0079
48 × 48 × 4864.0063
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.9048

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 0 to 52 lb. Adding 53 lb to the lightest class 400 unit of that size takes it to class 300.

Class 400 in metric

In metric the band is 0–16 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 48019
120 × 80 × 16048 × 32 × 63025
120 × 100 × 12048 × 40 × 48024
120 × 100 × 16048 × 40 × 63031

Shipping freight at class 400

Below 1 pcf the class is set by density alone at the top of the scale. Anything that reduces the space the freight occupies saves money at almost any cost: nesting, compressing, shipping components for assembly at destination.

Class 500 also exists, but only for items whose NMFC entries assign it; it is not on the standard density scale.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 300: 1 pcf to under 2; the next class down in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 400?

0 to under 1 lb/ft³ on the standard NMFC density scale (0–16 kg/m³).

What is the highest freight class?

Class 500, but only through specific NMFC items. On the standard density scale the top class is 400, for freight under 1 lb/ft³.

Is my freight automatically class 400 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.