ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 125

LTL · Density sub 5

Freight Class 125

Class 125 covers 6 to under 8 lb/ft³ (96–128 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 125.

ShipEstimatorClass 125 weight finder
Units
Class 125 on the density scale
Weight for class 125– 
Cube–
Density band–
Your density–
Your class–

Class 125 density range

Class 125 is sub 5 of the 13-step NMFC density scale: 6 to under 8 lb/ft³, or 96–128 kg/m³ in metric. It is light freight from 6 to under 8 lb/ft³. Freight at 8 pcf or more moves to class 100, and freight below 6 pcf drops to class 175.

Small boxed appliances, packaged furniture components, boxed lighting and many plastic goods typically measure 6–8 pcf. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 125

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 125 are:

Weight range for class 125 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.0240319
48 × 40 × 4853.3320426
48 × 40 × 6066.7400532
48 × 40 × 7280.0480639
48 × 48 × 4864.0384511
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.9293390

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 320 to 426 lb. Adding 107 lb to the lightest class 125 unit of that size takes it to class 100.

Class 125 in metric

In metric the band is 96–128 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 48116154
120 × 80 × 16048 × 32 × 63152203
120 × 100 × 12048 × 40 × 48145193
120 × 100 × 16048 × 40 × 63191254

Shipping freight at class 125

Below 8 pcf freight starts paying a noticeable premium per hundredweight. Packaging is usually the lever: cartons sized to the product, flat-pack instead of assembled, nested rather than loose items.

Check whether volume or cubic-capacity pricing would be cheaper for large, light shipments; some carriers offer it for freight that takes up a lot of trailer space.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 100: 8 pcf to under 10; the next class down in cost.
  • Class 175: 4 to under 6 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 125?

6 to under 8 lb/ft³ on the standard NMFC density scale (96–128 kg/m³).

What freight is class 125?

Freight measuring 6 to under 8 lb/ft³ on the standard density scale, if its NMFC item is density-based. Light boxed appliances and packaged furniture parts often fall here.

Is my freight automatically class 125 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.