ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 100

LTL · Density sub 6

Freight Class 100

Class 100 covers 8 to under 10 lb/ft³ (128–160 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 100.

ShipEstimatorClass 100 weight finder
Units
Class 100 on the density scale
Weight for class 100– 
Cube–
Density band–
Your density–
Your class–

Class 100 density range

Class 100 is sub 6 of the 13-step NMFC density scale: 8 to under 10 lb/ft³, or 128–160 kg/m³ in metric. It is medium-light freight from 8 to under 10 lb/ft³. Freight at 10 pcf or more moves to class 92.5, and freight below 8 pcf drops to class 125.

NMFTA's own density example lands here: a 48 × 40 × 45 inch pallet weighing 450 lb is 9.00 pcf. Boxed car accessories, boat covers and many packaged consumer goods measure 8–10 pcf. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 100

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 100 are:

Weight range for class 100 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.0320399
48 × 40 × 4853.3427532
48 × 40 × 6066.7533666
48 × 40 × 7280.0640799
48 × 48 × 4864.0512639
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.9391488

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 427 to 532 lb. Adding 107 lb to the lightest class 100 unit of that size takes it to class 92.5.

Class 100 in metric

In metric the band is 128–160 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 48155193
120 × 80 × 16048 × 32 × 63203254
120 × 100 × 12048 × 40 × 48194241
120 × 100 × 16048 × 40 × 63254317

Shipping freight at class 100

Class 100 is a common landing point for mixed retail freight. The step to class 92.5 at 10 pcf is often reachable by trimming pallet height: the 450 lb example above reaches 10 pcf at about 40.5 inches high instead of 45.

If your pallets regularly fall just below 8 pcf, the cushion matters more than the rate: dropping to class 125 adds a full class step.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 92.5: 10 pcf to under 12; the next class down in cost.
  • Class 125: 6 to under 8 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 100?

8 to under 10 lb/ft³ on the standard NMFC density scale (128–160 kg/m³).

How much does the NMFTA density example weigh?

450 lb on a 48 × 40 × 45 inch unit: 50 ft³ at 9.00 pcf, which is class 100.

Is my freight automatically class 100 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.