ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 92.5

LTL · Density sub 7

Freight Class 92.5

Class 92.5 covers 10 to under 12 lb/ft³ (160–192 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 92.5.

ShipEstimatorClass 92.5 weight finder
Units
Class 92.5 on the density scale
Weight for class 92.5– 
Cube–
Density band–
Your density–
Your class–

Class 92.5 density range

Class 92.5 is sub 7 of the 13-step NMFC density scale: 10 to under 12 lb/ft³, or 160–192 kg/m³ in metric. It is light-to-medium freight from 10 to under 12 lb/ft³. Freight at 12 pcf or more moves to class 85, and freight below 10 pcf drops to class 100.

Boxed computer equipment, boxed tools with plastic cases and some packaged consumer electronics typically measure in this range. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 92.5

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 92.5 are:

Weight range for class 92.5 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.0400479
48 × 40 × 4853.3533639
48 × 40 × 6066.7667799
48 × 40 × 7280.0800959
48 × 48 × 4864.0640767
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.9489586

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 533 to 639 lb. Adding 107 lb to the lightest class 92.5 unit of that size takes it to class 85.

Class 92.5 in metric

In metric the band is 160–192 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 48194232
120 × 80 × 16048 × 32 × 63254304
120 × 100 × 12048 × 40 × 48242290
120 × 100 × 16048 × 40 × 63318381

Shipping freight at class 92.5

The band is only 2 pcf wide, so freight moves through it easily. On a 48 × 40 × 48 inch pallet the whole class spans just 534 to 639 lb; a couple of extra cartons can be the difference between class 92.5 and class 85.

Check how the freight is measured: a top-heavy or leaning load can add several inches to the measured length, pushing density down a class.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 85: 12 pcf to under 15; the next class down in cost.
  • Class 100: 8 to under 10 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 92.5?

10 to under 12 lb/ft³ on the standard NMFC density scale (160–192 kg/m³).

Is class 92.5 the same as class 92?

Carriers and software often shorten it to 92, but the class is 92.5, for 10 to under 12 lb/ft³ on the standard scale.

Is my freight automatically class 92.5 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.