ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 85

LTL · Density sub 8

Freight Class 85

Class 85 covers 12 to under 15 lb/ft³ (192–240 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 85.

ShipEstimatorClass 85 weight finder
Units
Class 85 on the density scale
Weight for class 85– 
Cube–
Density band–
Your density–
Your class–

Class 85 density range

Class 85 is sub 8 of the 13-step NMFC density scale: 12 to under 15 lb/ft³, or 192–240 kg/m³ in metric. It is medium freight from 12 to under 15 lb/ft³. Freight at 15 pcf or more moves to class 70, and freight below 12 pcf drops to class 92.5.

Boxed small appliances with dense contents, crated machinery, cased wine and spirits on mixed pallets, and boxed electrical goods often measure 12–15 pcf. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 85

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 85 are:

Weight range for class 85 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.0480599
48 × 40 × 4853.3640799
48 × 40 × 6066.7800999
48 × 40 × 7280.09601,199
48 × 48 × 4864.0768959
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.9587732

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 640 to 799 lb. Adding 160 lb to the lightest class 85 unit of that size takes it to class 70.

Class 85 in metric

In metric the band is 192–240 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 48232290
120 × 80 × 16048 × 32 × 63305381
120 × 100 × 12048 × 40 × 48290362
120 × 100 × 16048 × 40 × 63381476

Shipping freight at class 85

Class 85 sits between two frequently used breaks. Add 25 % more weight in the same space, or take a fifth of the height away, and a 12 pcf pallet becomes a 15 pcf class 70 pallet. Consolidating two part pallets into one full one is the usual way to get there.

Going the other way, a pallet at 12.1 pcf is one measuring error from class 92.5. Build in a margin.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 70: 15 pcf to under 22.5; the next class down in cost.
  • Class 92.5: 10 to under 12 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 85?

12 to under 15 lb/ft³ on the standard NMFC density scale (192–240 kg/m³).

How do I get from class 85 to class 70?

Raise density to 15 pcf: put more product on each pallet, reduce height or void space, or consolidate part pallets into full ones.

Is my freight automatically class 85 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.