ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 70

LTL · Density sub 9

Freight Class 70

Class 70 covers 15 to under 22.5 lb/ft³ (240–360 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 70.

ShipEstimatorClass 70 weight finder
Units
Class 70 on the density scale
Weight for class 70– 
Cube–
Density band–
Your density–
Your class–

Class 70 density range

Class 70 is sub 9 of the 13-step NMFC density scale: 15 to under 22.5 lb/ft³, or 240–360 kg/m³ in metric. It is mid-weight freight from 15 to under 22.5 lb/ft³, one of the busiest bands in LTL. Freight at 22.5 pcf or more moves to class 65, and freight below 15 pcf drops to class 85.

Many food and grocery products, boxed machinery parts, packaged chemicals and boxed housewares measure in the high teens. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 70

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 70 are:

Weight range for class 70 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.0600899
48 × 40 × 4853.38001,199
48 × 40 × 6066.71,0001,499
48 × 40 × 7280.01,2001,799
48 × 48 × 4864.09601,439
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.97331,099

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 800 to 1,199 lb. Adding 400 lb to the lightest class 70 unit of that size takes it to class 65.

Class 70 in metric

In metric the band is 240–360 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 48290435
120 × 80 × 16048 × 32 × 63381571
120 × 100 × 12048 × 40 × 48363544
120 × 100 × 16048 × 40 × 63476714

Shipping freight at class 70

Class 70 is the band where a lot of everyday palletised freight lands, and its lower edge at 15 pcf is a break worth watching. NMFTA's own guidance uses it as an example: a pallet at 15.0 pcf ships at class 70, and the same pallet read at 14.9 pcf ships at class 85.

Design for a margin of several per cent above 15 pcf to allow for dimensioner and scale tolerance. On a 48 × 40 × 48 inch unit that means about 840 lb or more rather than exactly 800.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 65: 22.5 pcf to under 30; the next class down in cost.
  • Class 85: 12 to under 15 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 70?

15 to under 22.5 lb/ft³ on the standard NMFC density scale (240–360 kg/m³).

What is the density range for class 70?

15 to under 22.5 lb per cubic foot on the standard scale.

Is my freight automatically class 70 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.