ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 65

LTL · Density sub 10

Freight Class 65

Class 65 covers 22.5 to under 30 lb/ft³ (360–481 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 65.

ShipEstimatorClass 65 weight finder
Units
Class 65 on the density scale
Weight for class 65– 
Cube–
Density band–
Your density–
Your class–

Class 65 density range

Class 65 is sub 10 of the 13-step NMFC density scale: 22.5 to under 30 lb/ft³, or 360–481 kg/m³ in metric. It is heavy boxed freight between 22.5 and 30 lb/ft³. Freight at 30 pcf or more moves to class 60, and freight below 22.5 pcf drops to class 70.

Boxed automotive parts, flooring materials, cased beverages in cans and heavy boxed hardware commonly fall in this band. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 65

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 65 are:

Weight range for class 65 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.09001,199
48 × 40 × 4853.31,2001,599
48 × 40 × 6066.71,5001,999
48 × 40 × 7280.01,8002,399
48 × 48 × 4864.01,4401,919
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.91,1001,466

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 1,200 to 1,599 lb. Adding 400 lb to the lightest class 65 unit of that size takes it to class 60.

Class 65 in metric

In metric the band is 360–481 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 48435580
120 × 80 × 16048 × 32 × 63572762
120 × 100 × 12048 × 40 × 48544725
120 × 100 × 16048 × 40 × 63714952

Shipping freight at class 65

Class 65 is where well-packed industrial freight often sits. The next step down, class 60, needs 30 pcf: on a 48 × 40 × 48 inch unit that is 1,600 lb against class 65's minimum of 1,200 lb.

The most common way to drop out of this class is height. Freight shipped in tall, half-full cartons or with a lot of void fill loses density fast; right-sizing cartons and building a squarer pallet keeps it here.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 60: 30 pcf to under 35; the next class down in cost.
  • Class 70: 15 to under 22.5 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 65?

22.5 to under 30 lb/ft³ on the standard NMFC density scale (360–481 kg/m³).

How heavy must a pallet be for class 65?

Between 22.5 and 30 lb per cubic foot of the pallet as built. For a 48 × 40 × 48 inch unit that is 1,200 to 1,599 lb, pallet included.

Is my freight automatically class 65 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.