ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 60

LTL · Density sub 11

Freight Class 60

Class 60 covers 30 to under 35 lb/ft³ (481–561 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 60.

ShipEstimatorClass 60 weight finder
Units
Class 60 on the density scale
Weight for class 60– 
Cube–
Density band–
Your density–
Your class–

Class 60 density range

Class 60 is sub 11 of the 13-step NMFC density scale: 30 to under 35 lb/ft³, or 481–561 kg/m³ in metric. It is dense freight from 30 to under 35 lb/ft³; before July 2025 this class covered every density from 30 pcf upward. Freight at 35 pcf or more moves to class 55, and freight below 30 pcf drops to class 65.

Boxed books and printed matter, cartons of canned or jarred food, and boxed hand tools often measure in the low 30s. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 60

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 60 are:

Weight range for class 60 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.01,2001,399
48 × 40 × 4853.31,6001,866
48 × 40 × 6066.72,0002,332
48 × 40 × 7280.02,4002,799
48 × 48 × 4864.01,9202,239
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.91,4671,710

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 1,600 to 1,866 lb. Adding 267 lb to the lightest class 60 unit of that size takes it to class 55.

Class 60 in metric

In metric the band is 481–561 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 48581677
120 × 80 × 16048 × 32 × 63762889
120 × 100 × 12048 × 40 × 48726846
120 × 100 × 16048 × 40 × 639531,111

Shipping freight at class 60

Because the band is narrow, only 5 pcf wide, small changes in pallet height move freight in and out of it. A 48 × 40 pallet built to 60 inches needs between 2,000 and 2,333 lb to stay here. A 2,300 lb pallet at that height is class 60 (34.5 pcf); build the same weight 6 inches lower and it measures 38.3 pcf, class 55.

If your freight used to be class 60 under the old scale, re-check it: anything at 35 pcf or more now rates lower, at class 55 or 50.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 55: 35 pcf to under 50; the next class down in cost.
  • Class 65: 22.5 to under 30 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 60?

30 to under 35 lb/ft³ on the standard NMFC density scale (481–561 kg/m³).

Why did my class 60 freight change in 2025?

Docket 2025-1 split the old "30 pcf and over" band into three: 30 to under 35 stays class 60, 35 to under 50 becomes class 55, and 50 or more becomes class 50.

Is my freight automatically class 60 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.