ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 55

LTL · Density sub 12

Freight Class 55

Class 55 covers 35 to under 50 lb/ft³ (561–801 kg/m³) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 55.

ShipEstimatorClass 55 weight finder
Units
Class 55 on the density scale
Weight for class 55– 
Cube–
Density band–
Your density–
Your class–

Class 55 density range

Class 55 is sub 12 of the 13-step NMFC density scale: 35 to under 50 lb/ft³, or 561–801 kg/m³ in metric. It is very dense freight, between 35 and 50 lb/ft³, a band created by the 2025 change; before it, everything above 30 pcf was class 60. Freight at 50 pcf or more moves to class 50, and freight below 35 pcf drops to class 60.

Full pallets of bottled water or other liquids in bottles, cases of canned goods, reams of paper and boxed tiles commonly land in this range. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 55

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 55 are:

Weight range for class 55 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.01,4001,999
48 × 40 × 4853.31,8672,666
48 × 40 × 6066.72,3333,332
48 × 40 × 7280.02,8003,999
48 × 48 × 4864.02,2403,199
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.91,7112,443

For a 48 × 40 × 48 inch unit (53.3 ft³) the class spans 1,867 to 2,666 lb. Adding 800 lb to the lightest class 55 unit of that size takes it to class 50.

Class 55 in metric

In metric the band is 561–801 kg/m³. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 48677967
120 × 80 × 16048 × 32 × 638891,270
120 × 100 × 12048 × 40 × 488471,209
120 × 100 × 16048 × 40 × 631,1111,587

Shipping freight at class 55

A typical pallet of bottled water — about 48 × 40 × 52 inches as built and 2,050–2,400 lb — measures around 35–42 pcf, which is why beverage and canned-food shippers gained most from the 2025 split of the old class 60 band.

As with class 50, weight limits bite before space does. Check that the declared weight includes the pallet and stretch wrap, and that the carrier's dimensioner sees the true footprint: a few inches of overhang can drop a load from 35 pcf into class 60.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 50: 50 pcf or more; the next class down in cost.
  • Class 60: 30 to under 35 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 55?

35 to under 50 lb/ft³ on the standard NMFC density scale (561–801 kg/m³).

When did class 55 move onto the density scale?

With NMFTA Docket 2025-1, effective 19 July 2025, which added subprovision 12 (35 to under 50 pcf) at class 55.

Is my freight automatically class 55 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.