ShipEstimator
  1. Home
  2. Freight Class Chart
  3. Class 50

LTL · Density sub 13

Freight Class 50

Class 50 covers 50 lb/ft³ or more (801 kg/m³ or more) on the NMFC density scale. Enter a handling unit's size to see the weight range that puts it in class 50.

ShipEstimatorClass 50 weight finder
Units
Class 50 on the density scale
Weight for class 50– 
Cube–
Density band–
Your density–
Your class–

Class 50 density range

Class 50 is sub 13 of the 13-step NMFC density scale: 50 lb/ft³ or more, or 801 kg/m³ or more in metric. It is the densest freight on the scale: a pallet of it weighs more than half as much as the same volume of water (water is about 62.4 lb/ft³). There is no denser class on the scale, and freight below 50 pcf drops to class 55.

Stacked steel plate and bar, bagged cement and mortar, bricks and pavers, and boxed metal fasteners typically measure 50 pcf or more on a pallet. These are typical measurements, not classifications: the class on your bill of lading comes from the NMFC item for your commodity, which may use this density scale, a scale of its own, or a fixed class.

How much a pallet must weigh for class 50

Density is the handling unit's weight divided by its cube, measured at its greatest length, width and height, pallet included. For common unit sizes, the weights that land in class 50 are:

Weight range for class 50 by handling-unit size
Handling unit as built (in)ft³From (lb)Up to (lb)
48 × 40 × 3640.02,000no limit
48 × 40 × 4853.32,667no limit
48 × 40 × 6066.73,333no limit
48 × 40 × 7280.04,000no limit
48 × 48 × 4864.03,200no limit
48 × 32 × 55 (Euro pallet, rounded up to whole inches)48.92,444no limit

For a 48 × 40 × 48 inch unit (53.3 ft³) the class starts at 2,667 lb and has no upper weight limit on the scale.

Class 50 in metric

In metric the band is 801 kg/m³ or more. For pallets measured in centimetres, carriers in North America convert to inches and round each side up before working out the class, so the ranges below use the rounded size.

Pallet as built (cm)Billed as (in)From (kg)Up to (kg)
120 × 80 × 12048 × 32 × 48968no limit
120 × 80 × 16048 × 32 × 631,270no limit
120 × 100 × 12048 × 40 × 481,210no limit
120 × 100 × 16048 × 40 × 631,588no limit

Shipping freight at class 50

At this density the limits you meet are weight limits, not space. A 48 × 40 pallet stacked only 40 inches high can pass 2,000 lb, more than many pallets, racking systems and liftgates are rated for, and a trailer full of class 50 freight reaches its legal gross weight long before it is full. Build lower, check the pallet's load rating, and spread the weight.

Class 50 is the cheapest class per hundredweight, so there is nothing to gain by making the freight denser; the gains come from making sure it is measured and weighed accurately so the carrier does not reclass a mis-declared lighter pallet into it, or vice versa.

To check a whole shipment, with several pallets of different sizes, use the freight class calculator; it also shows how close each pallet is to the next break.

Neighbouring classes

  • Class 55: 35 to under 50 pcf; the next class up in cost.
  • All freight classes, including the item-only classes 77.5, 110, 150, 200 and 500.

Questions shippers ask

What is the density for freight class 50?

50 lb/ft³ or more on the standard NMFC density scale (801 kg/m³ or more).

Is class 50 the cheapest freight class?

Yes. It has the lowest rate per hundredweight, because dense freight uses the least trailer space for its weight. Since 2025 it is reached at 50 lb/ft³ or more on the standard density scale.

Is my freight automatically class 50 if it has this density?

Only if its NMFC item classifies by the standard density scale. Many items do since the 2025 changes, but some use their own density scales or a fixed class. Check the item before printing the bill of lading.

Sources

Rules checked: November 2026 Density breaks from the NMFC 13-subprovision scale (NMFTA Docket 2025-1). Commodity examples are typical densities only; the NMFC item for your goods decides the class.

Rates, fees and the rule pages behind this tool are checked automatically twice a week; last check 14 November 2026.